Oraflow Assist™ Model 1 — Standard
Model 1 connects straight to your dental chair's suction. Bend the shape-memory arm once and work hands-free. Purely mechanical, no electricity.
Model 2 is for clinics with a separate suction motor. Plug the motor into the stand and switch the suction on and off with your foot.
Set once with one hand, then both hands stay on the patient — no assistant needed.
01
One hand, a few seconds: bend the shape-memory arm and set the ejector exactly where you need it.
02
The arm holds the ejector steady — your hands stay on the scaler and the mirror, not the suction.
03
Run the whole procedure solo. Your assistant is free for sterilisation, mixing or the next patient.
04
No drooping, no re-adjusting: the ejector stays exactly where you set it until you're done.
Real procedure in a working clinic, filmed on a phone — no staging, no assistant.
For clinics with a separate suction motor. The motor plugs into the stand, and a foot switch turns it on and off. See how it differs from Model 1
Model 2 (Foot Switch) has the same self-standing stand and shape-memory arm as Model 1, plus a 3-pin power socket on the stand and a foot switch. It is made for clinics that use a separate suction motor instead of the dental chair's built-in suction.
Your suction motor plugs into the stand, and the stand plugs into the wall. Press the foot switch once to start the suction and press it again to stop it. Your hands never leave the patient.
Using your dental chair's suction instead? Model 1 is all you need. Not sure? Compare both models.
| Model | Model 2 — Foot Switch |
| Best for | Clinics that use a separate (stand-alone or portable) suction motor |
| Connects to | Your suction motor's tip adapter |
| Foot switch | Included. Press once to turn the suction motor ON, press again to turn it OFF |
| Power socket | 3-pin socket on the stand. Plug your suction motor into it |
| Power | Stand plugs into your clinic's main power supply (3-pin plug) |
| Installation | None — place beside the chair, connect your suction motor and plug in |
| Type | Self-standing floor unit — no chair mounting |
| Positioning | Flexible shape-memory arm, bends and holds any position |
| Suction tip adapter | Built into the arm |
| Maintenance | None required |
| Portability | Moves freely between operatories |
| Base | Heavy cast iron |
| Base plate | Hot-rolled high-tensile structural steel |
| Arm tube | Austenitic steel tube |
| Other parts | ISI-grade steel |
| Purchase | One-time purchase — no subscription or recurring cost |
| Quality system | Made under ISO 13485:2016 (Certificate No. PSC-MD-1441) |
| Patent | Patented in India — Govt. of India Reg. No. 476684-001 |
| Trade mark | Oraflow Assist™ — Application No. 14484688 |
| Warranty | 6 months manufacturer warranty |
| In the box | Floor stand base, steel pipe, shape-memory spring arm with built-in suction tip adapter, blue suction pipe with connector, foot switch, 3-pin power socket with mains cable, user guide |
Made under an ISO 13485:2016 medical-device quality system (Certificate PSC-MD-1441). The design is registered with the Patent Office, Government of India — Design No. 476684-001.
Certificate details & how to verify
Model 1 connects straight to your dental chair's suction. Bend the shape-memory arm once and work hands-free. Purely mechanical, no electricity.
“Experience a new level of dental care with hands-free suction technology, designed for better precision, improved hygiene, and enhanced patient comfort.”